Xerf 300 Shots vs 600 Shots: Effects, Side Effects, Prices
2026-07-13
Xerf lifting is a lifting procedure that delivers energy to the skin layer and fascia layer in three depths using dual monopolar RF.
Xerf 300 shots are mainly chosen for focused treatment of specific areas, while Xerf 600 shots are selected for managing the elasticity of the entire face.
The number of Xerf shots and the treatment cycle can vary depending on the amount of facial fat, sagging, and treatment goals.
Once you decide on a treatment, the next question arises: "How many should I get?" Those considering V treatments may also be deliberating between Xerf 300 shots and Xerf 600 shots.
Today, we will summarize the effects of Xerf, the differences between 300 shots and 600 shots, and which shot count is more suitable for different situations.
What is Xerf Lifting?
Xerf is a dual monopolar RF lifting that uses two frequencies simultaneously: 6.78MHz and 2MHz. As we age, not only does the skin layer deteriorate, but the movement of the fat layer and the elasticity of the fascia layer also decline. Xerf delivers thermal energy to the skin layer, fat layer, and fascia layer through this dual frequency structure.
Additionally, by adjusting the depth in three stages: Shallow-Middle-Deep, you can expect improvements in skin texture, tightening, and elasticity without volume loss with just one treatment.
Many people worry about pain, but the Wave Fit pulse technology and cooling system work together to allow for a relatively comfortable experience without the need for additional anesthesia. Thanks to the larger tip and spider pattern, energy is evenly distributed without concentrating on the edges, thus reducing the risk of burns.
What is the Difference Between Xerf 300 Shots and 600 Shots?
This is the part that many are most curious about. To conclude, it is better to choose the number of Xerf shots based on your treatment goals rather than just opting for a higher number. I will explain when each option is preferable.
Xerf 300 Shots - Focused Area Treatment
Xerf 300 shots are often chosen when you want to deliver energy intensively to areas that you are particularly concerned about when looking in the mirror, such as deep cheeks, double chin, or around a sagging jawline. It can be effective when aging has just begun, and the elasticity of specific areas is starting to decline rather than overall sagging, or when you are already undergoing other lifting treatments and want light enhancement with Xerf.
Xerf 600 Shots - Full Face Care
Xerf 600 shots provide care for the entire face at once, from the forehead to the cheeks, jawline, and neck boundary. It is suitable when you feel a decline in overall facial contours and elasticity, especially when you are concerned about nasolabial folds, marionette lines, and sagging jawlines simultaneously. If you have volume under the chin or a double chin that makes your face look heavy, Xerf 600 shots can help manage the entire face evenly.
To summarize in a table:
Category | Xerf 300 Shots | Xerf 600 Shots |
|---|---|---|
Treatment Range | Focused treatment of concern areas | Full face elasticity management |
Recommended for | Those in the early stages of aging | Those experiencing overall facial elasticity decline |
Main Concerns | Effective for deep cheeks, jawline, etc. | Effective for nasolabial folds, jawline, contours, etc. |
What is the Treatment Cycle for Xerf 300 Shots and 600 Shots?
Xerf is not a one-time lifting treatment but should be managed periodically according to the facial condition and treatment goals. Importantly, the re-treatment cycle for both Xerf 300 shots and 600 shots can vary depending on the facial type.
💛If you are concerned about overall facial elasticity
✅It is common to manage the entire face with Xerf 600 shots.
✅After the first treatment, it is good to have another session about 6 months later, and then maintain it once a year.
💛If you have a relatively low amount of facial fat
✅Initially, it is common to start withXerf 300 shots for partial management.
✅After the first treatment, have another session about 9 months later, and then maintain it annually.
✅At this time, it is important to carefully adjust the amount of energy and treatment range to prevent side effects such as volume loss in the cheeks.
💛If you want quick improvement of the V-line
✅Initially, it may be managed a bit more densely.
✅After the first treatment, proceed at 3 months and 6 months, and then maintain it once a year.
To summarize in a table:
Facial Concerns | Recommended Shot Count | Treatment Cycle |
|---|---|---|
Overall facial elasticity decline | Xerf 600 shots | 6 months → then once a year |
Faces with more fat | Xerf 300 shots | 9 months → then once a year |
Quick V-line improvement | Adjust according to condition | 3 months → 6 months → then once a year |
Frequently Asked Questions
When can I start feeling the effects of Xerf?
The effects of Xerf gradually appear over time.
✅Immediately after the treatment, some may feel an improvement in elasticity as collagen reactions begin.
✅Between 1 to 3 months, visible contour changes such as volume reduction under the chin, alleviation of nasolabial folds, and improvement of under-eye sagging occur as fibroblast activation continues.
✅Around 6 months, changes stabilize, and you can expect the final tightening effect.
However, the effects and progress may vary from person to person.
What concerns does Xerf address well?
If you are concerned about overall facial elasticity decline and sagging, you might consider Xerf lifting.
✅It is particularly suitable for cases where overall sagging, nasolabial fat sagging, marionette lines, and Indian bands (lines from under the eyes to below the cheekbones) appear together.
✅It is especially effective when there is volume under the jawline and double chin, making the face look heavy.
✅Conversely, if you naturally have a smaller amount of fat in your face, there may be concerns about side effects such as volume loss in the cheeks, so careful consultation is needed to adjust the amount of energy and treatment area.
Is Xerf a painless lifting treatment?
The Wave Fit pulse controls the temperature rise, and the cooling system works together to disperse thermal stimulation, allowing for a relatively comfortable treatment without the need for additional anesthesia. However, pain perception varies from person to person, so if you are sensitive, it is recommended to mention this during the consultation.
At Derna Clinic, we first conduct a precise examination of the skin and facial condition using AI skin diagnosis with EVE V MUSE 3D scanning, and then through 1:1 personalized consultation, we suggest which shot count, whether Xerf 300 or 600 shots, is suitable, considering the treatment area and energy amount.
If you want more detailed information about Xerf effects, side effects, prices, etc., please consult at Gangnam Derna Clinic.
SKIN. LOVE. LIFE
DERNA